31
31
G
B
TO ENTER:
TO EXIT:
OPEN2 BUTTON (COM - OPEN2) (ONLY PARK MODE)
OKCLOSE INPUT (COM - OKCLOSE) (ONLY PARK MODE)
TRAFFIC LIGHT CONTROL (COM - TLC) (ONLY PARK MODE)
RESTORING OPERATIONS AFTER A BLACKOUT
DIP10 - OFF =>
DIP10 - ON =>
OPERATING SAFETY ACCESSORIES
PHOTOCELL (COM- PHOT)
NB:
ATTENTION: In case the receiver led remains lit, malfunctioning of
the main supply is suspected.
It is advisable to connect electrically to earth
the columns or the photocells stands to the
terminal D-, to shield the photocells from
external noise.
Be careful not to short circuit the system
when the supply phases are inverted!
SAFETY STRIP (COM -EDGE)
MONITORING SAFETY STRIPS (D+TEST D-)
WARNING:
OPERATING IN PARK MODE (DIP6 ON)
NO
NC
D+
D-
+
D-
S
D+
+
S
COM
+
_
+
_
-
+
K BUTTON
STOP
CLOSE
OPEN 1
AERIAL
LED
BUZZER
COAX
MAGNETIC LOOP
TO EXIT
MAGNETIC LOOP
TO ENTRY
R=2K2
EDGE
12 Vdc max 0,5A for ACCESSORY SUPPLY
12 Vdc max 0,5A for AUTOTEST EDGE
12Vdc
Term.
D-
To Next Page
Loading...