What to do if my Richard Wolf PowerDrive ART1 Medical Equipment device does not function?
If your Richard Wolf medical device isn't working, first, ensure the main power switch is turned ON. Next, check if the main power cable is securely connected. If it still fails to function, the device fuse may be defective and require replacement. Finally, verify that there is main voltage from the in-house power supply.
Why is there no suction performance or low suction performance in my Richard Wolf Medical Equipment?
If you're experiencing no or low suction performance with your Richard Wolf medical equipment, consider the following: Check the tube for incorrect connections, kinks, or clogs; clean or replace the tube if necessary. If the issue persists, the suction channel in the motorized handle or rotary blade/abrader may be clogged. Rinse out the suction channel in the handle or use a suitable tool, such as a Kirschner wire, to clear the passage in the rotary blade/abrader. Replace the rotary blade/abrader if needed.
What to do if my Richard Wolf PowerDrive ART1 Medical Equipment motorized handle / Power Drill is not running?
If the motorized handle or power drill on your Richard Wolf medical equipment isn't running, check for interruptions in the cable connection. Ensure the plug on the motorized handle/power drill or device is fully inserted. If the issue persists, the cable may be defective and need replacement, or if the cable is firmly attached, send the motorized handle in for repair. The motor itself could also be defective, in which case, send in the motorized handle/power drill along with the connection cable for repair.
What to do if my Richard Wolf PowerDrive ART1 Medical Equipment motorized handle is not running when the foot switch is actuated?
If the motorized handle of your Richard Wolf medical equipment does not run when the foot switch is activated, check the connection between the foot switch and the device.
What does it mean if the display shows “No hand piece connected” on my Richard Wolf PowerDrive ART1 Medical Equipment?
If your Richard Wolf medical equipment displays “No hand piece connected”, it means the motorized handle or power drill is not connected. Connect the motorized handle or power drill to resolve this issue.
General| Brand | Richard Wolf |
|---|---|
| Model | PowerDrive ART1 |
| Category | Medical Equipment |
| Language | English |
To Next Page
