Need help?Do you have a question about the RichAuto A1X Series and is the answer not in the manual?
General| Input Voltage | 24V DC |
|---|---|
| Axis | 4 |
| File Format | G code |
| Communication | USB |
| Power Supply | DC |
| Control Axis | 4 |
| Communication Interface | USB |
| Operating Temperature | 0°C to 45°C |
| Humidity | Relative humidity 0-95% without condensation |
Overview of the RichAuto system, its components, and applications.
Details the main parts of the RichAuto control system.
Details the interface board's ports and indicators.
Lists and describes the terminal names, signal descriptions, and pin functions.
Explains installation requirements and wiring for input/output terminals.
Details how to set machine hardware parameters and precautions.
Covers the process of running files for automated machining.
Steps for defining the starting point for workpiece processing.
Standard procedure for updating system software via U disk.
Alternative method for system software upgrade using shortcut keys.
Addresses issues like screen flicker and restart problems.
Covers common operational errors and their solutions.
Troubleshooting for origin return failures causing spindle issues.
Solutions for incorrect movement direction during origin return.
To Next Page
