To Next PageTo Next Page
Need help?Do you have a question about the RichAuto A1X and is the answer not in the manual?
General| Brand | RichAuto |
|---|---|
| Model | A1X |
| Category | Control Systems |
| Language | English |
Lists the components of the RichAuto system.
Details the individual parts of the RichAuto system.
Specifies the physical dimensions of the interface board.
Explains the normal and emergency start procedures.
Introduces the 16 buttons on the control handle.
Describes one-touch and combination button operation modes.
Provides a detailed mapping of button functions.
Details the ports and connectors on the interface board.
Explains the signal definitions for interface board ports.
Illustrates the wiring diagrams for system connections.
Guides on initial setup and system commissioning.
Outlines the main categories within the system menu.
Provides in-depth explanations of menu options and settings.
Process for returning machine axes to their home positions.
Methods for loading processing files into the system.
Covers manual control of the machine tool via keyboard.
How to change and adjust processing speeds manually.
Explains the different motion modes (Continue, Step, Distance).
Guides on testing input/output signals manually.
Details how to switch between machine and work coordinate systems.
Introduces the handle and buttons for the A12 system.
Explains the system's output signals.
Details setup and wiring for plasma arc control.
Describes key parameters specific to the A12 system.
Introduces the handle and buttons for the A15 system.
Explains the system's output signals.
Wiring details for multi-spindle configurations.
Configuration steps for multi-spindle operation.
Provides example G-code for the A15 system.
Introduces the handle and buttons for the A18 system.
Explains the system's input signals.
Describes key parameters specific to the A18 system.
Provides example G-code for the A18 system.
Instructions for upgrading the system software.
How to use the U-disk for file transfer and system functions.
Settings and configurations for servo drivers.
A comprehensive list of supported G-codes.
Procedures for setting tool length and origin.
Methods for calculating system pulse equivalents.
Solutions for common issues and system errors.
Overview of the RichAuto A1X motion control system.
Key features and capabilities of the RichAuto A1X system.
