Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 29
Update Version eg：P1.409/rz-xxxx/q10-82 Product ID eg：A0020112
Soft Version eg：A1.1936 Emergency Version eg：A1.1920
Soft type：3-axis carving Hardware type：Support 3-inch screen Support Flash Disk Mode
5. Machine Operation
5.1 Return home
It will display ―all axis home‖, ―Z home only‖, ―none axis home‖ after starting up the DSP
handle. Choose any one you want. Machine return home can correct the coordinate of system.
In some cases, such as after normal power off, reboot ad continue last operation, user no need
to reset machine, just choose ―none axis home‖. That is because system auto save coordinate
value when system quit.
5.2 Import processing files
Before processing, generally we should import files. RichAuto system has 2 ways for
processing: U disk file processing, inner file processing.
1. Directly import the processing file into U disk, then run the handle.
2. Copy the process file to inner memory space via U disk.
5.3 Manual operation
Manual Processing Operation refers to controlling of the machine tool though keyboard. User
can change the operate speed and set the grid under manual processing operation. System will
enter Manual Operation state after returned home, and the screen displays:
Manual control state initial interface:
1X 0.000 MAUN
1Y 0.000 F 2
1Z 0.000 L SP
Continue
To Next Page
Loading...
