Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 41
1) Press ― ‖ or ― ‖to move cursr to choose the mill type.
2) Press ― ‖ to enter the scan mill set, it includes: Scan type, Width, Height, Diameter,
Depth, Z Step, T Ratio.
3) Press ― ‖ and ― ‖to move cursor on the option which need modify, press
― ‖ to choose mill type(X Scan or Y Scan), also press this button to modify the
parameters. Press ― ‖ after modified all the parameters to save them.
2. Encircle mill
1) Press ― ‖ or ― ‖to move cursr to choose the mill type.
2) Press ― ‖ to enter the scan mill set, it includes: Scan type, Width, Height, Diameter,
Depth, Z Step, T Ratio.
3) Prss ― ‖ and ― ‖to move cursor on the option which need modify, press
― ‖ to choose mill type(AC or C), also press this button to modify the parameters.
Press ― ‖ after modified all the parameters to save them.
5.6.7 Calculate work time
Calculate the processing time according to the system processing speed. After pre-read
Scan mill set
Scan Type AC
Width 100.000
Height 100.000
Diameter 10.000
Depth 0.100
Z Step 0.100
T Ratio 0.800
To Next Page
Loading...
