Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 46
6.4 Parameters description
1. Axis Prohibited（MACHINE SETUP）
If it is a two-axis plasma cutting machine, users can choose to set t Z-axis disable, and all
relevant parameters about Z axis will no longer be meaningful.
2. Arc Delay（MACHINE SETUP）Unit：ms
OnDelay：How long to wait for starting plasma after reading file.
OffDelay：How long to wait for closing plasma after processing.
3. Cylinder Delay（MACHINE SETUP）Unit：ms
DwnDelay：How long to wait for cylinder getting down.
UpDelay：How long to wait for cylinder rising up.
4. Circle Limit (AUTO PRO SETUP)
System default 1000（not speed unit）. If small circle processing speed too fast that cause
deformation or bad quality,users can reduced this value proportionately, such as
500,250,125 ...,and it can greatly improve the quality of processing.
5. Plasma Config (AUTO PRO SETUP)
PreOnDly：How long to wait for cylinder getting down.
PreOfDly：How long to wait for cylinder rising up.
To Next Page
Loading...
