Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 23
8. Work Array
Set array parameter,including columncount,Rowcount,Columnspace,Rowspace,Interval（unit：
ms）
Columnspace：File spacing of X direction
Rowspace：File spacing of Y direction
Total Processing times= columncount* Rowcount
Interval：System default 0，it means no wait.
During processing，if users need to change processing materials after completion of each
processing,you need set time interval a negative number.When the first time processing is
completed, the screen prompt: waiting for the next array processing, press any key to start the next
array processing at this time, if not press，system keep waiting.
4.2.3 SYSTEM SETUP
System Setup Chart
To Next Page
Loading...
