RichAuto A1X - 6 A12 Plasma Cutting Motion Control System; Handle and Buttons Introduction; Output Description; Arc Setup&Wiring

Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 44
6. A12--Plasma Cutting Motion Control System
6.1 Handle and buttons introduction
One-touch button and Combination button are same to A11,and the shell color of A12 is
brown.
Handle Buttons
Function
Arc On/Off, decimal point inputting
The handle and interface board of A12 make special anti-interference,which make system
work normally during strong interference.
6.2 Output description
OUTPUT SIGNAL
Function
Notes
Y01
Plasma arc control output
Logic low，control arc&cylinder
Y02
Cylinder Delay output
Up&down delay
6.3 Arc setup&wiring
2-axis setting
1) MENU-MACHINE SETUP-Home Setup-Home Order-XY home
2) MENU – AUTO PRO SETUP –Safe Height-Set 0