Need help?Do you have a question about the RichAuto A132 and is the answer not in the manual?
Identifies the 16 buttons on the handheld controller.
Explains how to use single and combination button presses.
Explains the specific function of each button.
Details parameters like pulse equivalent, table size, and spindle delay.
Describes how to set the machine's starting or reference point.
Explains how to switch and adjust manual operation speeds.
Covers setting workpiece origin, stop position, and file selection.
Guides on defining the starting point for processing.
General| Control Axis | 3 |
|---|---|
| Axis | 3 |
| File Format | G-code |
| Communication | RS232, USB |
| Power Supply | DC |
| Input Voltage | 24V |
| Interface | RS232, USB |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 60°C |
To Next Page
