RichAuto A132 - Factory Setup

Add: 5F
, No.4 building, No 4. Yard, life Rd, life science park,
Tel：010-53275118 Fax
：
4.2.4 Factory Setup
Factory setup structure diagram
1. Pulse Equiv
(Pulse Equivalent)
The number of pulses of the system needs to send when machine moves every 1mm.
Unit：pulse/mm.
(1) Stepper motor drive
Calculation formula
= (pulse number of motor revolving one full turn)/
machine moved one full turn).
Pulse number that motor revolving one full turn calculation formula:
subdividing number of drive
Factory setup
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park,
Beiqing St., Changping d
ist.
：
010-53275110/53275111 Web site：
www.richnc.com.cn
Factory setup structure diagram
(Pulse Equivalent)
The number of pulses of the system needs to send when machine moves every 1mm.
= (pulse number of motor revolving one full turn)/
machine moved one full turn).
Pulse number that motor revolving one full turn calculation formula:
(360°/stepping angle)*
subdividing number of drive
Factory setup
Pulse Equiv
Table size
Spindle delay
Home setup
Acceleration
Voltage setup
Max. work speed
Function setup
Input list
Output list
Input disable
G code setup
Process setup
Set trial PW
Beijing RichAuto S&T Co., Ltd
ist.
Beijing, China
www.richnc.com.cn
26
The number of pulses of the system needs to send when machine moves every 1mm.
= (pulse number of motor revolving one full turn)/
(distance of
(360°/stepping angle)*
Max. work speed