Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 1
Foreword
1) System Introduction
RichAuto A1X motion control system independently developed by Beijing RichAuto S&T
Co., Ltd and it can be widely applied to machinery, advertisement, woodworking, mold
engraving machines, laser, flame, plasma cutting machines, and others in the machine control
field.
RichAuto A1X make DSP as the core of the system,High-speed processing;Use embedded
structure, high degree of integration and strong stability make installation and operation easy;
Support U disk, removable storage card reader; High speed transfer, no longer dependent on
the computer to realize off-line operation.
2) Characteristics
1. Adopting position control mode,support 3-axis and 4-axis linkage motion control,double Y
drive.
2. Standard with 8 Input/Output interface board.
3. Support various processing format, such as G code, PLT, bitmap and DXF etc.
4. Intelligent memory function,support power failure protection and breakpoint processing
function.
5. Support portable storage mode function.
6. Multi-coordinate memory function. Provide 9 work coordinates system, the user can switch
among the 9 coordinates, each coordinate system can save a process origin information.
7. Support adjusting spindle frequency during processing. The spindle frequency from 0 to
maximum frequency is divided into 8 gears, 1 - 8 gear can be processed directly adjust up
and down without suspend processing.
8. Support adjusting speed ratio during processing. Users can adjust the speed ratio from 0.1-1,
ascending or descending per 0.1 numerical.
9. Simple manual operation mode.Including ―Continue,Step,Dist‖, manual operation becomes
more simple and convenient.
To Next Page
Loading...
