13
RICKARD 2019
MLM INTEGRATION WITH BMS
At the bottom of the page is listed the point positions for global parameters available on the MCU. Averaged
inputs for disk position and room temperature and the global outputs for setpoint, control override and occu-
pancy override. Note these parameters are applied to all the control zones available on the MCU.
To confirm live BACnet data, a MCU BACnet (client) reader can be downloaded from the Rickard Trac download
site http://trac.lhar.co.za/ . Enter either the MCU IP address or BACnet ID for the device to be discovered. Note
the BACnet reader display all data points in sequence, whether that point contains data or not.
To Next Page
Loading...