2
RICKARD 2019
MLM INTEGRATION WITH BMS
MLM Integration with BMS...........................................................................................................................................................................................................1
MCU 2 Gateway Overview
.........................................................................................................................................................................................................3
Output from BMS
..........................................................................................................................................................................................................................3
Input to BMS
.......................................................................................................................................................................................................................................4
Zone/Master/Slave Diffuser concept
…………………………………………………………………………………………………………………………...…..4
Channel and Zone designations
...............................................................................................................................................................................5
Identifying, mapping and binding of network variables to other network protocols
...................6
MCU to Lon Mapping
..............................................................................................................................................................................................................6
Discovering the MCU 2 with Lon
……………………………………………………………………………………………………………………………………….7
MCU 2 BACnet to BMS setup
……………………………………………………………………………………………………………………………………………….9
Bacnet/IP setup
……………………………………………………………………………………………………………………………………………………………………………….9
BACnet ms/tp setup
…………………………………………………………………………………………………………………………………………………………………….10
MCU BACnet point mapping
………………………………………………………………………………………………………………………………………………...11
Diffuser Mode (status) - multi-state input 0-59
……………………………………………………………………………………………………...14
Occupancy Mode (status) - multi-state input 60-119
………………………………………………………………………………………....15
BMS control override - multi-state output 0-59
……………………………………………………………………………………………………..15
Occupancy override - multi-state output 60-119
…………………………………………………………………………………………………..15
MLM Control Override Handling Procedure
……………………………………………………………………………………………………………….17
Manual control override activation
…………………………………………………………………………………………………………………………………..17
RTC control override activation
..................................................................................................................................................................................18
RTC control override operation
..................................................................................................................................................................................19
RTC control override Command Table:
………………………………………………………………………………………………………………………….19
Occupancy sensor description
……………………………………………………………………………………………………………………………………………..19
Occupancy control override operation
………………………………………………………………………………………………………………………….20
System set-up for Occupancy Sense
……………………………………………………………………………………………………………………………….20
MLM Tool occupancy wizard
………………………………………………………………………………………………………………………………………………...22
MLM24 Tool Occupancy display
................................................................................................................................................................................22
Occupancy override
……………………………………………………………………………………………………………………………………………………………………..23
Light Switch operation
……………………………………………………………………………………………………………………………………………………………….23
Airflow sense setup and operation
…………………………………………………………………………………………………………………………………...24
Table of Contents
To Next Page
Loading...