DRUM UNIT
SM 3-41 B064 Series/B140 Series/G126
Replacement
Adjustment
3.6.9 CLEANING FILTER
OPC drum ( 3.6.5)
[A]: Cleaning filter
3.6.10 CLEANING BLADE
OPC drum ( 3.6.5)
[A]: Drum cleaning blade ( x 2)
NOTE:
1) Clean the blade edge carefully with only a soft, clean cloth.
2) Handle the blade carefully to avoid nicking its edge.
3) New blades are treated with special setting powder, so avoid touching
the edge of a new cleaning blade. If the edge of a new blade is
accidentally wiped clean, dust it lightly with some toner before installing
it.
4) Before installing a new blade, make sure that the blade side seals are
not pinched by the blade.
B140R947.WMF
B140R948.WMF
[A]
[A]
To Next Page
Loading...
Need help?
General
