Registering Folders
227
7
Changing the protocol
This section describes how to change the protocol.
A Press [SMB], or [NCP].
B A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
C Enter each item again.
Reference
p.217 “Registering an SMB Folder”
Changing the registered FTP folder
This section describes how to change the registered FTP folder.
A Press [Change] under Port No.
B Enter the new port number, and then press the {q} key.
C Press [Change] under Server Name.
D Enter the new server name, and then press [OK].
E Press [Change] under “Path”.
F Enter the new path, and then press [OK].
To Next Page
Loading...
