What to do if Ricoh Pro 8310 shows 'Remaining potential: Vr detection error (K)'?
If you're encountering a 'Remaining potential: Vr detection error (K)' issue with your Ricoh All in One Printer, the suggested solution is to replace the photoconductor unit.
What to do if Ricoh All in One Printer shows 'Charge potential: Vd adjustment error (K)'?
If your Ricoh All in One Printer displays a 'Charge potential: Vd adjustment error (K)', the recommended action is to replace the charge unit.
What to do if Ricoh All in One Printer shows 'Exposure potential: Vpl adjustment error (K)'?
If you're experiencing an 'Exposure potential: Vpl adjustment error (K)' on your Ricoh All in One Printer, the suggested solution is to replace the charge unit.
General| Print Resolution | 2400 x 4800 dpi |
|---|---|
| Paper Capacity | Standard: 3, 300 sheets Maximum: 12, 600 sheets |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Maximum Paper Size | 13" x 19.2" |
| First Print Speed | 4.5 seconds |
| Weight | 518 lbs |
| Connectivity | Ethernet 10/100/1000Base-TX |
| Power Source | 220-240V, 50/60Hz |
| Duplex Printing | Standard |
| Network Connectivity | Ethernet 10 base-T/100 base-TX/1000 base-T |
Lists selected SC codes, their errors, and recommended procedures.
Addresses issues with toner spots, stains, and black spots on prints.
Identifies and provides solutions for various types of streaks appearing on prints.
Deals with gloss issues and problems related to toner fusing.
Discusses common causes and solutions for paper misfeeds.
Addresses paper jams, skew issues, and detection problems.
Explains misfeed messages, general misfeeds, and double feeding.
Ways to reduce waiting time before printing starts.
To Next Page
