What to do if Ricoh All in One Printer shows 'Remaining potential: Vr detection error (K)'?
If you're encountering a 'Remaining potential: Vr detection error (K)' issue with your Ricoh All in One Printer, the suggested solution is to replace the photoconductor unit.
What to do if Ricoh Pro 8310S All in One Printer shows 'Charge potential: Vd adjustment error (K)'?
If your Ricoh All in One Printer displays a 'Charge potential: Vd adjustment error (K)', the recommended action is to replace the charge unit.
What to do if Ricoh All in One Printer shows 'Exposure potential: Vpl adjustment error (K)'?
If you're experiencing an 'Exposure potential: Vpl adjustment error (K)' on your Ricoh All in One Printer, the suggested solution is to replace the charge unit.
Lists selected SC codes, their errors, and recommended troubleshooting procedures.
Addresses issues with toner spots and staining appearing on printed copies.
Describes black spots appearing at specific intervals on prints.
Addresses streaks parallel to the paper feed direction.
Deals with extended, blurred streaks parallel to paper feed direction.
Covers streaks appearing in solid-filled areas of prints.
Describes irregular black streaks parallel to the feed direction.
Addresses two vertical streaks of 13mm length near the leading edge.
Covers two wide streaks parallel to the paper feed direction.
Addresses issues with stained paper edges.
Describes random dots creating a dirty background on prints.
Explains ghost images appearing at a distance from the intended image.
Addresses scratches and stained paper edges on images.
Discusses toner scattered around a solid-fill print.
Discusses issues related to loss of color in prints.
Details white spots of 0.2-0.3mm diameter on prints.
Describes white spots surrounded by denser spots.
Covers mottling occurring in solid-filled areas of prints.
Addresses issues with uneven image density.
Discusses uneven density across the entire image.
Addresses density unevenness from top to bottom of the image.
Covers issues where the leading edge of the image is fainter.
Explains how to resolve insufficient toner fusing on printed copies.
Lists common causes and solutions for frequent paper misfeeds.
Addresses issues where paper is not fed straight.
Discusses causes and solutions for the machine feeding multiple sheets.
Addresses issues where paper is not fed properly into the machine.
Addresses paper jams caused by misfeeding or double feeding in the interposer.
General| Operating System Compatibility | Windows, Mac OS, Linux |
|---|---|
| Duplex Printing | Standard |
| Print Resolution | 1200 x 4800 dpi |
| Connectivity | USB 2.0, Ethernet 10/100/1000Base-T |
| First Print Speed | 3.5 seconds |
| Maximum Paper Size | 13" x 19.2" |
To Next Page
