4. Are the sheets delivered with their printed side facing up?
Yes Go to the next step.
No Contact your service representative.
5. Is this setting essential?
Yes Contact your service representative.
No Change the setting so that the sheets are delivered with their printed side facing
down.
6. Print the image. Is the problem resolved?
Yes Finished!
No Contact your service representative.
Paper Edges Are Soiled (3)
120 mm
(4.8 in.)
40 mm
(1.6 in.)
CNT014
Cause:
The paper feed speed of the decurler unit is too high.
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Registering a Custom Paper", Preparation.
• Decreasing the paper feed speed of the decurler unit may result in creases, scratches, or paper
jams if thin paper is used.
4. Troubleshooting Paper Delivery Problems
98
To Next Page
Loading...
