Copier / Document Server Features
78
3
❖ Job End Call
You can choose whether or not the beeper sounds when copying is complete.
The default setting is On.
If Panel Tone of User Tools (System Settings) settings is [On], the machine
beeps to notify you that it did not complete a job for reasons such as copying
was interrupted, the paper tray ran out of paper, or a paper jam occurred.
❖ Copy Function Key: F1-F5
You can assign frequently used functions to function keys F1 to F5.
The default setting for "Copy Function Key: F1" is 1 Sided→2 Sided: T to T.
The default setting for "Copy Function Key: F2" is 2 Sided: T to T→2 Sided: T to T.
The default setting for "Copy Function Key: F3" is 1 Sided→1 Sided Combine.
The default setting for "Copy Function Key: F4" is 1 Sided→1 Sided Com-
bine: 4 originals.
The default setting for "Copy Function Key: F5" is Create Margin.
❖ Document Server Storage Key: F1-F5
You can assign frequently used functions to function keys F1 to F5. You can
also change assigned functions.
The default setting for "Document Server Storage Key: F1" is 2 Sided Original
Top to Top.
The default setting for "Document Server Storage Key: F2" is 1 Sided→1 Sided
Combine.
The default setting for "Document Server Storage Key: F3" is 1 Sided→1 Sided
Combine: 4 originals.
The default setting for "Document Server Storage Key: F4" is 1 Sided→1 Sided
Combine: 8 originals.
The default setting for "Document Server Storage Key: F5" is Create Margin.
Reference
p.3 “Accessing User Tools”
p.41 “Warm Up Notice (copier/Document Server)”
"Selecting the Original Type Setting", Copy/ Document Server Reference
"Adjusting Copy Image Density", Copy/ Document Server Reference
"Selecting Copy Paper", Copy/ Document Server Reference
To Next Page
Loading...
