FIRMWARE DOWNLOAD
SM 5-11 B273
Service
Program
Mode
9. Ensure that “Network Firmware” [B] is selected, as shown below.
10. Click the “Browse” button and select the network firmware file saved on the PC.
11. Click the “Upgrade” button
12. Ensure that the firmware is completely updated.
5.3.2 FIRMWARE RECOVERY PROCEDURE
The machine will not operate if the update procedure did not function correctly. In
this case, perform the following steps:
1. Turn the power off and then on.
2. Repeat the steps in download procedure 5.3.1 (Web Image Monitor Mode).
The machine will restart the upgrade procedure.
B273S05.TIF
[B]
To Next Page
Loading...
