ADF MOTOR ASSEMBLY
SM 3-15 B273
Replacement
Adjustment
3.4 ADF MOTOR ASSEMBLY
Remove the following before removing the ADF motor assembly:
Rear cover 3.2.1
Side covers .3.2.2
Scanner assembly 3.3
1. Unclip the harness [A] from the platen cover.
2. Remove the 2 x securing the ADF assembly and remove it. (Ensure that the
harness is threaded through the frames).
3. Remove the cover [C] as shown
NOTE: Ensure that the rubber rollers do not become contaminated with grease
while disassembling the ADF motor assembly.
B273R925.WMF
B273R926.WMF
[A]
[B]
[C]
To Next Page
Loading...
