ADF MOTOR ASSEMBLY
B273 3-16 SM
4. Release the bushing [D] and rotate it until it reaches the slot, as shown above.
5. Remove the pick-up assembly [E].
6. Remove the 2 x securing the upper cover [F] and remove the upper cover,
as shown above.
NOTE: Note the position of the ferrite core and motor harness routing before
removing the ADF motor assembly. Return these to their original positions
when reassembling the ADF assembly.
B273R927.WMF
B273R928.WMF
[D]
[E]
[F]
To Next Page
Loading...
