PAPER JAM CONDITIONS
SM 4-5 B273
Trouble-
shooting
4.2 PAPER JAM CONDITIONS
The following are conditions in which paper can become jammed during a print job:
• The tray is loaded incorrectly or overfilled.
• The tray has been pulled out during a print job.
• The front cover has been opened during a print job.
• Incorrect paper type was used.
NOTE:
An error message shows on the LCD if a paper jam occurs. Find and
remove the jammed paper. If you don’t see the paper, open the covers. Do
not use a tweezers, pincers or other metal tools to clear paper jams.
This could damage the internal mechanisms.
Jam0 (Paper Feed Area) Jam1 (Fusing/Toner Cartridge)
Jam2 (Paper Exit Area) By-pass Jam (By-pass Tray)
PTL
EXIT
Sensor
Feed
Sensor
MP Sensor
B273T08.WMF
PTL
Feed
Sensor
MP Sensor
B273T07.WMF
PTL
EXIT
Sensor
Feed
Sensor
MP Sensor
B273T09.WMF
PTL
FR
EXIT
Sensor
Feed
Sensor
MP Sensor
B273T10.WMF
To Next Page
Loading...
