PAPER JAM CONDITIONS
B273 4-10 SM
4.2.4 JAM2 (PAPER EXIT AREA)
Perform the following to remove a jam of this type:
1. Open and close the front cover. The jammed paper automatically exits the
machine. Proceed to step two if the paper does not exit from the machine.
2. Gently pull the paper out of the front output tray.
3. Open the face-up door [A] if there is resistance on the paper when you try to
pull it out of the front output tray.
4. Remove the paper [B] by gently pulling it straight out.
5. Close the rear cover.
6. Open the close the front cover to resume printing.
B273T19.WMF
[A]
[B]
To Next Page
Loading...
