Ricoh Aficio MP 2550 User Manual

• p.69 "Interface Settings"
Wireless LAN
This section lists the settings required for using the network TWAIN Scanner a wireless LAN connection.
For details about how to specify the settings, see "Interface Settings".
Menu User Tool Setting Requirements
Interface Settings/Network Machine IPv4 Address Necessary
Interface Settings/Network IPv4 Gateway Address As required
Interface Settings/Network DNS Configuration As required
Interface Settings/Network DDNS Configuration As required
Interface Settings/Network Domain Name As required
Interface Settings/Network WINS Configuration As required
Interface Settings/Network Effective Protocol Necessary
Interface Settings/Network LAN Type Necessary
Interface Settings/Network Permit SNMPv3 Communication As required
Interface Settings/Network Permit SSL/TLS Communication As required
Interface Settings/Network Host Name As required
Interface Settings/Network Communication Mode Necessary
Interface Settings/ Wireless LAN SSID Setting As required
Interface Settings/ Wireless LAN Ad-hoc Channel As required
Interface Settings/ Wireless LAN Security Method As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN are connected, the selected interface takes precedence.
Network Settings Required to Use Network TWAIN Scanner
41
1

Ricoh Aficio MP 2550 Specifications