Menu User Tool Setting Requirements
File Transfer Reception Protocol As required
File Transfer POP3 / IMAP4 Settings As required
File Transfer Administrator's E-mail Address As required
File Transfer E-mail Communication Port Necessary
File Transfer E-mail Reception Interval As required
File Transfer Max. Reception E-mail Size As required
File Transfer E-mail Storage in Server As required
File Transfer
Program / Change /
Delete E-mail Message
As required
File Transfer Fax E-mail Account Necessary
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN are connected, the selected interface takes precedence.
• SMTP Server and Fax E-mail Account must be specified in order to send Internet Fax.
• When POP before SMTP is set to [On], you must also make settings for Reception Protocol and POP3 /
IMAP4 Settings.
• When SMTP Authentication is set to [On], you must also make settings for Administrator's E-mail
Address.
• POP3 / IMAP4 Settings, E-mail Communication Port, and Fax E-mail Account must be specified in
order to receive Internet Fax.
• When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.
• p.69 "Interface Settings"
• p.77 "File Transfer"
Network Settings Required to Use Internet Fax
29
To Next Page
Loading...
Need help?
General