Why does my Ricoh Printer fail to feed paper?
Failure to feed occurs when the bottom plate is not exerting enough pressure on the paper remaining in the tray. To fix this, increase the length of time the motor runs forward to raise the tray. This is a positive setting.
What to do if my Ricoh Aficio MP 3350B Printer has double feeding?
Double feeding occurs when the bottom plate is exerting too much pressure on the paper remaining in the tray. To correct this, increase the length of time the motor runs in reverse to lower the tray. This is a minus (-) value.
General| Print Speed (Black) | 33 ppm |
|---|---|
| Maximum Paper Size | A3 |
| Standard Paper Capacity | 1, 100 sheets |
| Maximum Paper Capacity | 3, 100 sheets |
| Copy Speed | 33 cpm |
| Copy Resolution | 600 x 600 dpi |
| Paper Capacity (standard) | 1, 100 sheets |
| Type | Multifunction |
| Functions | Print, Copy, Scan |
| Duplex Printing | Yes |
| Automatic Document Feeder (ADF) | Yes |
| Scan Resolution | 600 dpi |
| Zoom Range | 25% - 400% |
| Connectivity | Ethernet, USB |
| Scanner Type | Flatbed + ADF |
| Hard Drive | 40 GB |
| Interface | USB 2.0, Ethernet 10/100Base-TX |
| Operating Systems Supported | Mac OS |
| Memory | 768 MB (maximum) |
To Next Page
