Need help?Do you have a question about the Ricoh Aficio MP201SPF and is the answer not in the manual?
General| Type | Multifunction Printer |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Laser |
| Max Print Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 3 seconds per page |
| Modem Speed | 33.6 Kbps |
| Standard Paper Capacity | 250 sheets |
| Connectivity | USB 2.0, Ethernet |
| Dimensions | 485 x 450 x 481 mm |
| Warm-up Time | 30 seconds |
| Paper Output Capacity | 100 sheets |
| Print Speed | 20 ppm |
| Copy Speed | 20 cpm |
| Scanner Type | Flatbed |
| Zoom | 25% - 400% |
| Supported Paper Sizes | A4, A5, A6, B5, Legal, Letter |
| Operating System Compatibility | Windows, Mac, Linux |
| Duplex Printing | Automatic |
Lists critical safety and operational precautions to take before installing any optional units or components.
Specifies environmental conditions, machine leveling, space requirements, and power specifications for proper installation.
Covers essential safety precautions including general handling, lithium batteries, cables, and static electricity.
Covers the replacement procedures for the BICU and the main controller board, including preparation steps.
Provides critical safety warnings and procedures for replacing the laser unit, emphasizing eye safety.
Introduces service program (SP) and special service program (SSP) modes for machine maintenance.
Explains how to utilize SP mode for NVRAM data management, firmware updates, and test pattern printing.
Provides a comprehensive list of Service Call (SC) codes, their symptoms, possible causes, and reset procedures.
Directs users to appendices for specific fax error codes and troubleshooting procedures.
Details recommended maintenance tasks (clean, replace, inspect) for various machine components at different service intervals.
Introduces the System Service Mode, listing SP codes for feed, drum, scanner, mode, peripheral, data log, and history functions.
Lists specific SP codes for feed, fusing, and scanner adjustments with their functions and settings.
Provides a comprehensive list of fax error codes with their meanings and suggested causes or actions.
Introduces system service modes for fax, including bit switches for system, IFAX, printer, communication, and G3 settings.
Explains how to adjust bit switches for system, fax, printer, and communication settings.
Provides RAM addresses and parameter settings for ringing signal detection and automatic dialing.
To Next Page