Bit Switches
D115/D116 5-30 SM Appendix
5.2.3 PRINTER SWITCHES
Printer Switch 00 [SP No. 1-103-001]
No FUNCTION COMMENTS
0
Select page separation marks
0: Off
1: On
0: If a 2 page RX transmission is split, [*] is printed
in the bottom right corner of the 1st page and only
a [2] is printed in the upper right corner of the 2nd
page.
1: If a 2 page RX transmission is split into two
pages, for example, [*] [2] is printed in the bottom
right corner of the 1st page and only a [2] is printed
in the upper right corner of the 2nd page.
This helps the user to identify pages that
have been split because the size of the
paper is smaller than the size of the
document received. (When A5 is used to
print an A4 size document, for example.)
1
Repetition of data when the
received page is longer than
the printer paper
0: Off
1: On
1: Default. 10 mm of the trailing edge of the
previous page are repeated at the top of the next
page.
0: The next page continues from where the
previous page stopped without any repeated text.
2
Prints the date and time on
received fax messages
0: Disabled
1: Enabled
This switch is only effective when user parameter
02 - bit 2 (printing the received date and time on
received fax messages) is enabled.
1: The machine prints the received and printed
date and time at the bottom of each received
page.
3-7
Not used
Do not change the settings.
To Next Page
Loading...
