Controller Options
SM 2-33 D115/D116
Installation
and then check that this device is detected.
If reception is poor, you may need to move the machine:
Make sure that the machine is not located near an appliance or any type of equipment that
could generate a strong magnetic field.
Position the machine as close as possible to the access point.
SP Mode Settings for IEEE 802.11a/g Wireless LAN
The following SP commands can be set for IEEE 802.11a/g
SP No. Name Function
5840 004 SSID Used to confirm the current SSID setting.
5840 006 Channel MAX
Sets the maximum range of the channel settings for
the country.
5840 007 Channel MIN
Sets the minimum range of the channel settings
allowed for your country.
5840 011 WEP Key Select Used to select the WEP key (Default: 00).
5840 018 SSID Check Used to check the SSID.
5840 020 WEP Mode
Used to display the maximum length of the string that
can be used for the WEP Key entry.
To Next Page
Loading...
