Controller Options
D115/D116 2-34 SM
2.8.3 IEEE 1284 INSTALLATION
Unplug the machine power cord before starting the following procedure.
Accessories
Check the accessories and their quantities against the table below.
No. Description Q’ty
1 IEEE1284 Interface Ass’y 1
2 UL Sheet 1
3 Caution Sheet 1
Installation Procedure
1. Remove the interface cover [A] (
x 2).
2. Install the IEEE 1284 board into I/F slot [B] (
x 2).
3. Turn on the main power switch.
4. Print out the configuration page (User Tools/Counter > Printer Features > List/Test Print),
and then check that this device is detected.
To Next Page
Loading...
