Ricoh Aficio MP201SPF - Scanner Alignment Adjustment; Scanner Hp Sensor

Scanner Unit
D115/D116 4-12 SM
4.4.5 SCANNER HP SENSOR
1. Rear cover (
p.4-3)
2. Front left cover (
p.4-5 "Operation Panel and Upper Covers")
3. Scanner HP sensor [A] (
x 1, hook)
 Move the first scanner from the home position if you have difficulty removing the
sensor.
4.4.6 SCANNER ALIGNMENT ADJUSTMENT
1. Rear cover ( p.4-3)
2. Rear scale, upper right cover, front left cover, operation panel (
p.4-5 "Operation Panel
and Upper Covers")
3. Exposure glass (
p.4-8)
4. Loosen the 2 screws holding the 1st and 2nd scanner belts in place.
5. Slide the 1st and 2nd scanners so that all four of the following are roughly aligned on both