Other Replacements
D115/D116 4-46 SM
4.11.5 TONER SUPPLY CLUTCH
1. Toner bottle holder
2. Copy tray (
p.4-4)
3. Rear cover (
p.4-3)
4. Disconnect the connector on C19 on the BICU.
5. Push the clutch coupler [A] to the rear side, and remove the clip ring [B] from the back of
the copier.
6. Coupler and spring [C]
7. Lift the toner supply clutch [D] and remove it.
When removing, note how the wire goes through a clamp, and also note where it
passes through the rear of the machine.
To Next Page
Loading...
