Adjusting Copy Image Area
SM 4-65 D115/D116
Replacement
and
Adjustment
SP Specification
SP4-009-001 (Main Scan Mag) ± 1.0%
SP4-008-001 (Sub Scan Mag) ± 1.0%
Scan Auto Adjustment
This procedure adjusts the standard white density level. Adjust the standard white density after
any of the following maintenance work:
Replacing the standard white plate
Replacing the BICU
Replacing the lens block
Executing the memory clear (SP5-801-002 [basic model], SP5-998-001 [other models]).
1. Place 10 sheets of new A4 paper on the exposure glass.
2. Close the platen cover.
3. Activate the SP mode.
4. Select Copy SP4-428.
5. Specify "1" and press the OK key. The copier automatically adjusts the standard white
density.
To Next Page
Loading...
