System Service Mode
SM Appendix 3-11 D115/D116
Appendix:
SP Mode
Tables
SP4-XXX (Scanner)
4008*
SubScan Mag (Scanner)
[-0.9 to +0.9 / 0.0 / 0.1%/step]
4008 1
Adjusts the sub-scan magnification (
"Adjusting Copy Image Area" in the
section "Replacement and Adjustment").
4009*
Main Scan Mag (Scanner)
[–0.9 to +0.9 / 0.0 / 0.1%/step]
4009 1
Adjusts the main-scan magnification (
"Adjusting Copy Image Area" in the
section "Replacement and Adjustment").
4010*
LE Scan Regist
[–5.0 to +5.0 / 0.0 / 0.1 mm/step]
4010 1
Adjusts the leading edge registration (
"Adjusting Copy Image Area" in the
section "Replacement and Adjustment").
4011*
S-to-S Scanner Registration
[–2.0 to +2.0 / 0.0 / 0.1 mm/step]
4011 1
Adjusts the side-to-side registration for scanning in platen mode (
"Adjusting Copy Image Area" in the section "Replacement and Adjustment").
4012*
Scan Erase Margin
[0 to 9.0 / 1.0 / 0.1 mm/step]
4012 1 Leading Edge
Adjusts the scanning margin. Generally, the
scanning margin should be as little as possible. To
adjust the image area, use SP2-101.
4012 2 Trailing Edge
4012 3 Left Side
4012 4 Right Side
4013
Scanner Free Run
4013 1 Conducts the scanner free run with the exposure lamp on.
To Next Page
Loading...
