Scanner Unit
D115/D116 4-8 SM
4.4 SCANNER UNIT
To clean the mirrors and lenses, use a blower brush or wet cotton.
4.4.1 EXPOSURE GLASS
To clean the exposure glass, use alcohol or glass cleaner.
1. Rear cover (
p.4-3)
2. Rear scale, upper right cover (
p.4-5 "Operation Panel and Upper Covers")
3. Exposure glass [A]
Reassembling
Make sure that the marking on the glass is at the rear left corner, and that the left edge of the
glass is aligned flush against the support ridge [B] on the frame.
Adjustment
When replacing the white plate, perform the "Scan Auto Adjustment" (
SP4-428-001).