Key Counter (Card) Interface Type A
D115/D116 2-44 SM
2.9 KEY COUNTER (CARD) INTERFACE TYPE A
Installation Procedure for the Key Counter (Card) Interface Type A (20 pins)
2.9.1 ACCESSORY CHECK
No. Description
1. MKB (bridge board)
2. BRACKET:MKB B2621310
3. SCREW:M3X6 03530060 F
4. CLAMP:LWS-0711Z 11050508
2.9.2 INSTALLATION PROCEDURE
1. Remove the rear cover.
2. Remove the cut-out in the rear cover (circled in red in the photo).
Rev. 04/25/2012
⇒
To Next Page
Loading...
