Ricoh Aficio MP C3300 User Manual

Registering Frequently Used Functions
You can store frequently used copy job settings in the machine memory and recall them for future use.
You can store up to 10 programs.
• When a specified program is registered as the default, its values become the default settings, which
are displayed without pressing the [Program] key, when modes are cleared or reset, and after the
operation switch is turned on. See “Registering the Initial Display's Default Functions”.
• Paper settings are stored based on paper size. So if you place more than one paper tray of the same
size, the paper tray prioritized under Tray Paper Settings in User Tools will be selected first. For details,
see “System Settings”, Network and System Settings Guide.
• Programs are not deleted by turning the power off or by pressing the [Clear Modes] key.
• p.105 "Registering the Initial Display's Default Functions"
Registering Functions in a Program
You can register functions in a program.
1. Edit the copy settings so all functions you want to store in a program are selected.
2. Press the [Program] key.
BCU051S
Registering Frequently Used Functions
101
2

Ricoh Aficio MP C3300 Specifications

General

Print Technology	Laser
Print Speed (Black)	33 ppm
Print Speed (Color)	33 ppm
Max Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Technology	CCD
Copy Speed	33 cpm
Max Paper Size	A3
Monthly Duty Cycle	150, 000 pages
Copy Resolution	600 dpi
Multiple Copy	Up to 999 copies
Scan Speed (B&W)	50 ipm
Scan Speed (Color)	50 ipm
Paper Output Capacity (Maximum)	500 sheets
Processor	600 MHz
Memory (Standard)	1 GB
Memory (Maximum)	1.5 GB
Power Consumption (Maximum)	1.5 kW
Functions	Print, Copy, Scan
Zoom	25% - 400%
Scan Destinations	Email, Folder, USB
Paper Weight	60 - 220 gsm
Hard Disk Drive	80 GB
Interface	USB 2.0, Ethernet
PDL (Page Description Language)	PCL6, PostScript 3
Operating Systems Compatibility	Windows, Mac, Linux
Power Source	220 - 240 V