Fax Destination
229
7
G Change the settings.
H Press [OK].
Note
❒ To change the name, key display and title, see "Changing a Registered Name".
Reference
p.214 “Changing a Registered Name”
p.229 “To change the fax number”
p.229 “To change the line”
p.230 “To change the SUB Code”
p.230 “To change the SEP Code”
p.230 “To set the International TX Mode”
p.230 “To select the fax header”
p.231 “To set label insertion”
Using a Fax Destination as a sender
A Press [Protection].
B Press [Sender] on the right side of Use Name as.
To change the fax number
A Press [Change]under Facsimile No..
B Enter the new fax number using the number keys, and then press [OK].
To change the line
A Press [Select Line].
B Select the line, and then press [OK].
To Next Page
Loading...
