1. Ventilation holes
Prevent overheating.
• To cool the machine's interior, the fan may continue running after the machine finishes a large print
job. For details, see “When You Have Problems Operating the Machine”, Troubleshooting .
• p.68 "Control Panel"
• p.80 "Turning On/Off the Power"
About the Guide on the Internal Tray 2 (Optional)
If printed sheets come out curled, raise the guide on the internal tray 2.
To raise the guide on the internal tray 2
Push the lever that is on the underside of the internal tray 2 inward.
Guide to Components
61
To Next Page
Loading...
