Printing GL/2 and TIFF Files
110
4
D Specify files to be printed.
The following shows the examples of printing a file named “file 1” in the
“C:PRINT” directory and printing file 1 and file 2.
ftp> put C:\PRINT\file1
ftp> mput C:\PRINT\file1 C:\PRINT\file2
E Quit ftp.
ftp> bye
Note
❒ “=”, “,”, “_”, and “;”cannot be used for filenames. File names will be read
as option strings.
❒ For “mput” command, option can not be defined.
❒ For “mput” command, “*” and “?” can be used as wild cards in file names.
❒ When printing a binary file in ASCII mode, print may not come out cor-
rectly.
To Next Page
Loading...
