Ricoh Aficio MP W3600 - Print Settings for GL;2 & TIFF Filter; Adjusting the Print Settings for GL;2 & TIFF Filter

Print Settings for GL/2 & TIFF Filter
111
4
Print Settings for GL/2 & TIFF Filter
This section explains the GL/2 & TIFF Filter settings that you can set using the
control panel. GL/2 & TIFF Filter settings are applied to GL/2 and TIFF files
printed from Web Printing Tool and the printing commands.
❖ Priority of Settings
• Settings changed using the control panel take priority.
• You cannot change GL/2 & TIFF Filter initial configuration made using
Web Printing Tool, if the setting was changed using the control panel and
is currently in effect.
• GL/2 & TIFF Filter is ineffective during the printing of GL/2 files using the
HDI driver. Settings made using an application have priority over GL/2 &
TIFF Filter settings.
Note
❒ The settings are the same for both Web Printing Tool and the control panel.
❒ For details about making settings using Web Printing Tool, see Web Print-
ing Tool Help.
Adjusting the Print Settings for GL/2 & TIFF Filter
A Press the {User Tools/Counter} key on the control panel.
B Press [Extended Feature Settings].
C Press [GL/2 & TIFF].
ATW022S