• 5 minutes
• 15 minutes
• 30 minutes
• 60 minutes
• 120 minutes
Brightness Sensor Level
Specify the ambient light sensor's brightness sensitivity level (trigger threshold).
You can set the light sensor to one of five sensitivity thresholds. "Level 5 (Dim)" is the highest
sensitivity threshold. Selecting this level will cause the sensor to trigger at the smallest decrease
in ambient light.
Selecting a lower level will cause the sensor to trigger at progressively lower levels of ambient
light.
Default: [Level 3 (Dark)]
• Level 1 (Very Dark)
(equivalent to a moonlit night: approximately 0.4 lx)
• Level 2
• Level 3 (Dark)
(equivalent to a cinema during a screening: approximately 2.4 lx)
• Level 4
• Level 5 (Dim)
(equivalent to a building interior at sunset: approximately 75.0 lx)
Print Compressed Data
Specify whether or not to print compressed data. The supported compression format is GZIP.
Default: [Off]
• On
• Off
Memory Usage
Select memory to be used from Font Priority or Frame Priority.
Default: [Frame Priority]
• Font Priority
Allocates more memory to the PDL work area. Select this setting if printing fails due to insufficient
memory.
• Frame Priority
System Menu
105
To Next Page
Loading...
