Ricoh Aficio SP 4310N - Changing the Host Interface Menu

Changing the Host Interface Menu
Follow the procedure below to change the I/O Timeout setting.
1. Press the [Menu] key.
CEE128
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [I/O Timeout], and then press the [OK] key.
4. Press the [ ] or [ ] key to select the lead time needed to end a printing operation, and then
press the [OK] key.
5. Press the [Menu] key.
Host Interface Menu
131
4