To Next PageTo Next PageWhat to do if my Ricoh Aficio SP 4310N Printer displays a message that the selected job has already been printed or deleted?
If your Ricoh Printer displays a message that the selected job has already been printed or deleted, press Exit on the message screen.
What to do if my Ricoh Aficio SP 4310N Printer cannot communicate with Remote Communication Gate?
If your Ricoh Printer cannot communicate with Remote Communication Gate, check the connection to the Remote Server Gate.
What to do if my Ricoh Aficio SP 4310N Printer shows an error on the Ethernet board?
If the Ricoh Printer detects an error on the Ethernet board, pull out and then re-install the controller board. If the problem persists, contact your sales or service representative.
Why does my Ricoh Aficio SP 4310N Printer show authentication from the SD card failed?
If your Ricoh Printer shows authentication from the SD card failed, turn the power off, and then back on. If the error recurs, contact your sales or service representative.
What to do if my Ricoh Printer's self diagnostic test failed due to a loopback error?
If the Ricoh Printer's self diagnostic test failed due to a loopback error, replace the IEEE 1284 board that caused the error.
Power| power requirements | 120V, 60Hz |
|---|---|
| maximum power consumption | 960W or less |
| energy saver power consumption | 3.9W or less |
Paper Handling| standard paper supply | 500-sheet Tray + 100-sheet Bypass Tray = 600 sheets |
|---|---|
| optional paper supply | 500-sheet Paper Feed Unit (1 or 2 may be installed) |
| maximum paper capacity | 1, 600 sheets |
Print Specifications| print resolution | 300 x 300 dpi, 600 x 600 dpi, 1200 x 600 dpi |
|---|---|
| output speed | 37 pages per minute (Letter) |
| first print speed | 6.9 seconds or less |
Memory| standard memory | 256 MB RAM |
|---|---|
| maximum memory | 512 MB RAM |
| optional hard disk drive | 80 GB |
Weight and Dimensions| main unit dimensions | 15.28" x 17.72" x 13.58" (388 mm x 450 mm x 345 mm) |
|---|---|
| main unit with duplex unit dimensions | 15.28" x 21.37" x 13.58" (388 mm x 543 mm x 345 mm) |
| main unit weight | 34.1 lb. (15.5 kg) |
| main unit with duplex unit weight | 47.3 lb. (21.4 kg) |
Explains the concept and purpose of extended features.
Classifies extended features based on their development environment (Java, C).
Outlines the scope and how to use the manual effectively.
Guides on accessing the main operation screen via Web Image Monitor.
Details the process for administrator login to access restricted features.
Provides an overview of various screens within the Web Image Monitor interface.
Explains the elements and functions of the Startup Setting screen.
Describes the layout and information presented on the Extended Feature Info screen.
Details the user interface and steps for installing extended features.
Explains the interface and procedure for uninstalling extended features.
Covers the interface and options available in the Administrator Tools section.
Mentions additional screens and their context within the manual.
Explains how to start and stop the operation of extended features.
Provides step-by-step instructions to activate extended features.
Details the procedure for deactivating extended features.
Describes how to set activation priority for Type-J extended features.
Guides on how to view detailed information about installed extended features.
Step-by-step guide on how to install new extended features onto the device.
Instructions for removing installed extended features from the device.
Explains how to configure memory allocation (Heap/Stack) for extended features.
Covers configuration of network communication protocols used by extended features.
Details how to enable or disable HTTP/HTTPS communication protocols.
Lists trademarks associated with the product and its software components.
