M065/M066 Correspondence White Paper Ver. 3.0
Page 43 of 58
-This driver supports Bi-directional (two-way) communication, this communication will be started after
"Accessories" tab being selected or "Update Now" icon arrowed in the next figure being clicked by
users. The driver UI and available options will be changed automatically depending on the connected
network printers and MFPs. USB connection doesn’t support two-way communication. Please note
that mobile port is not supported; “add port” has to be made manually for the first time to use each
printing device.
-Users could use basic functions of GW MFPs and Printers* such as duplex, 2 in 1, staple and so on
without each PSD file by Generic UI. Available functions depend on the result of Bi-directional
communication. But the behavior of Generic UI is not guaranteed.
Generic UI of B222 series
To Next Page
Loading...
