Ricoh B234 - Page 60

SERVICE CALL CONDITIONS
B234/B235/B236/D101/D102/D103 4-58 SM
Trimming Buffer HP Sensor: Right (S100) Error
SC795-19 A
The trimmings buffer failed to move away
from the dump port on top of the
trimmings box or failed to arrive at the
port.
• The trimmings buffer sensor: right
(S100) did not go OFF within 3 sec.
when the trimmings buffer was
supposed to move away from the
sensor.
• The trimmings buffer sensor: right
(S100) did not go ON within 5 sec.
when the trimmings buffer was
supposed to arrive at the sensor.
• Clear jammed trimming
scraps away from the
trimmings buffer
• Trimmings buffer motor
(M37) connections loose,
broken, defective
• Motor defective
• Sensor harness loose,
broken, defective
• Sensor defective
Trimmings Buffer Motor (M37) Error
SC795-20 A
The trimmings
buffer motor is not
rotating.
• Clear jammed trimming scraps away from the
trimmings buffer
• Trimmings buffer motor (M37) connections loose,
broken, defective
• Motor defective
• Trimmings buffer sensor: left/right (S103/S100)
harness loose, broken, defective
• Sensor defective
Book Press Plate Sensor (S104) Error
SC795-21 A
The trimmings buffer and book
press plate did not move after
the trimmings buffer motor
turned on.
The book press plate sensor
did not go OFF with 3 sec..
-or-
The book press plate sensor
did not go ON within 3 sec..
• Clear jammed trimming scraps away
from the trimmings buffer
• Trimmings buffer motor (M37)
connections loose, broken, defective
• Motor defective
• Trimmings buffer sensor: left/right
(S103/S100) harness loose, broken,
defective
• Sensor defective
Book Buffer Tray HP Sensor (S78)
SC795-22 A
The book buffer tray failed to move
to the rear or failed to move to the
front.
• The book buffer tray HP sensor
failed to go ON within 3 sec.
when the tray was supposed to
move front to rear.
• The book buffer tray HP sensor
failed to go OFF within 3 sec.
when the tray was supposed to
move rear to front.
• Book jammed on the rail of the
book buffer tray
• Book buffer tray overloaded
• Book buffer tray motor (M39)
connections loose, broken,
defective
• Motor defective
• Book buffer tray HP sensor (M78)
harness loose, broken, defective
• Sensor defective