Ricoh B234 - Page 93

SERVICE CALL CONDITIONS
SM 4-91 B234/B235/B236/D101/D102/D103
Trouble-
shooting
Important: The SC798-** series SC codes apply to the Perfect Binder
D391.
Jog Fence HP Sensor: Front/Large (S14) Error
SC798-1 B
The front jog fence HP sensor for large
size paper did not go ON within the
prescribed time when the front jogger
motor turned on to move the fence.
-or-
The front jog fence HP sensor for large
size paper did not go OFF within the
prescribed time when the front jogger
motor turned on to move the fence.
• Jog fence HP sensor: front/large
(S14) defective
• Jogger motor: front (M4)
defective
• Sensor or motor connector
loose, broken, defective
Jog Fence HP Sensor: Rear/Small (S13) Error
SC798-2 B
The rear jog fence HP sensor for small
size paper did not go ON within the
prescribed time when the rear jogger
motor turned on to move the fence.
-or-
The rear jog fence HP sensor for small
size paper did not go OFF within the
prescribed time when the rear jogger
motor turned on to move the fence.
• Jog fence HP sensor:
rear/small (S13) defective
• Jogger motor: rear (M5)
defective
• Sensor or motor connector
loose, broken, defective
Jog Fence HP Sensor: Rear/Large (S15) Error
SC798-3 B
The rear jog fence HP sensor for large size
paper did not go ON within the prescribed
time when the rear jogger motor turned on
to move the fence.
-or-
The rear jog fence HP sensor for large size
paper did not go OFF within the prescribed
time when the rear jogger motor turned on
to move the fence.
• Jog fence HP sensor:
rear/large (S15) defective
• Jogger motor: rear (M5)
defective
• Sensor or motor connector
loose, broken, defective
Switchback Roller HP Sensor (S11) Error
SC798-4 B
The switchback roller HP sensor did not go ON
within the prescribed time after the motor
turned on to raise the roller through an arc of
40 degrees.
-or-
The switchback roller HP sensor did not go
OFF within the prescribed time when the motor
turned on to lower the roller through an arc of
20 degrees.
• Switchback Roller HP
Sensor (S11) defective
• Switchback Roller Motor
(M7) defective
• Sensor or motor
connector loose, broken,
defective