Ricoh BRG-P1 - Page 214

SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20231 D
Failure to form negative pressure in the maintenance unit (insufficient suction)
(Tank 1 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20232*
1
D
Failure to form negative pressure in the maintenance unit (insufficient suction)
(Tank 2 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20233*
1
D
Failure to form negative pressure in the maintenance unit (insufficient suction)
(Tank 3 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20234*
1
D
Failure to form negative pressure in the maintenance unit (insufficient suction)
(Tank 4 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20241 D
Failure to form negative pressure in the maintenance unit (failure to release air
(due to ink intrusion, etc.)) (Tank 1 error)
Turn the main power switch off and then back on.
6. Troubleshooting
212